craft problems

R

Rekca

Active Member
just started using the craft script
once I get it started its great

I get everything I need before starting and stand right by the crafting table (have no need to move at all)

Im using it to level tinkering and transmuting on differnt toons and therein lies the problem

when I load craft it opens the recipe book and then displays craft UI after a short wait
Once the craft UI is open it doesnt display the transmute or tinker tick box and it only displays spells in the 70 to 80 range when either sort alphabetic or by level is selected (this comes up preset to alphabetic with the figures 70 - 80 in the level select boxes) the spells displayed dont change even when I input 0 - 80 it still only shows spells of level 70 - 80
If I click around a bit on the tabs it will sometime display the full range of spells and the transmute/tinker check box
at that point I start to craft succsessfully
Any suggestions as to how I can achive this strait off the bat?

As an aside i have noticed that my ping goes through the roof sometimes when I start craft up (2700) but most of the time the ping is around 600 when first opening craft

I also use fetish nightfall UI but dont know if this has a bearing on the problem

I am more than happy to document this if you could tell me what info is required.
 
V

Valerian

ISX Specialist
1. Tinkering and transmuting "levels" are from 1 to 400.
2. The list does not refresh until you click the "Refresh List" button.
3. Set your level range from 1 to 400.
4. Click the "Refresh List" button.

initial lag is caused by SOE sending you your entire recipe book the first time it starts.

There is an option to save the level ranges. Check your options.

This isn't nearly as difficult as you seem to be making it out to be. Play with options, most of it is self-explanatory.
 
R

Rekca

Active Member
Thanks for the info will try it out.

Changing from 0 - 400, followed by refresh list, was the trick it needed, woohoo I got a transmuting button.

I also found I needed to wait after clicking on refresh list, before clicking anything else or it wouldnt respond.

The save recipe list range option only saves 1 - 400 as 1 - 40 when reloading craft (for me anyway tried it 5 times), but easy solved just added a 0 and refreshed list (however it does now come up with the transmuting button every time when loading).
Thanks again for your input.
 
Last edited:
You must log in or register to reply here.
Top Bottom