EQ2BOT -Need some assistance

R

Redstrike

Active Member
Ok, I started off easy with the crafter and harvester with isxeq2 but wanted to move up to the nice EQ2BOT. Followed instructions on installing and then downloaded spell list and routine for my Berserker from these forums. I use Eq2Pather Combat to make my path. Load up EQ2Bot, all seems well other than "Session name My Toon's Name Rejected" So i proceed to setup the options, pull spell set up, what to pull, percentages to pull at etc. Trying not to leave anything out, Then set it to Dungeon Crawl mode, hit Start and i get..

Navigation points cleared..
/path/to/my/navigation file/Eq2Combat_commonlands.xml loaded (just an example)


And my guy doesnt move at all....my guy will not pull anything within range, but if something aggros the routine kicks in and i wtfpwn it...

On the other hand every once and a blue moon when I hit start I get..

Found path in 2 hops - Repeats this over and over again as my character paces back and forth every 2 steps or so.

Any help is much needed. I tried to read through the 16 pages on ismods.com and through what little has been posted here so far...
 
I

IeU

Active Member
ive this problem :/

i set the autohunting and the char just stays there, does not move or pull, action kicks in if i pull manually
 
I

IeU

Active Member
yes ive already followed it, i tryed with an assassin and berserker, it does not seem to scan for any target.

going to try a caster class.

edited,

k tryed a wizard now and worked, it seems that the problems lies on the auto-pull

in a melee class i set to use ranged attack, but it does nothing,

with caster, i put a spell and the bot works . . .
 
K

kumpel100

Active Member
IeU said:
yes ive already followed it, i tryed with an assassin and berserker, it does not seem to scan for any target.

going to try a caster class.

edited,

k tryed a wizard now and worked, it seems that the problems lies on the auto-pull

in a melee class i set to use ranged attack, but it does nothing,

with caster, i put a spell and the bot works . . .
Click to expand...
i dont wanne up roll old treaths but this still happent
if i use on my SK bow pull it does 60% of time nothing do i setup a Spell to pll it works perfect.
 
B

Busygal

Active Member
Are you using vendor bought ammo for the ranged weapon? Or player made? I know that when I was using vendor bought I frequently didn't pull the mob I was trying for because I missed or the range wasn't far enough. But once I changed to player made ammo I didn't have this problem any more (I have a pally and a monk that this has made a difference for)
 
K

kumpel100

Active Member
Busygal said:
Are you using vendor bought ammo for the ranged weapon? Or player made? I know that when I was using vendor bought I frequently didn't pull the mob I was trying for because I missed or the range wasn't far enough. But once I changed to player made ammo I didn't have this problem any more (I have a pally and a monk that this has made a difference for)
Click to expand...
i use self craftet tin arrows.
 
I

ironape2

Active Member
Im betting that your pull range is further then your bow/ammo will allow. If it is your toon will move to pull range and then do nothing.

if your bow is 35 range and your ammo has a -5 on it then you need to set your pull distance to under 30. Try setting your pull distance to something low like 10 and see what it does. Also the scan range for Camp, Dungeon Crawl, Autohunt must be high enough to detect mobs along your path or it wont do anything.
 
Pygar

Pygar

EQ2Bot Specialist
As stated on the wiki, set ranges AT LEAST 5 under actual.

Cause eq2bot uses client side distance checks, but when you actual use an ability or fire a bow, that distance is checked vs the server side distance and location of both actors. MANY times what you see isn't exactly in sync with what the server sees when it processes the data. You need to allow for some fudge.
 
You must log in or register to reply here.
Top Bottom