Zoned in with my defiler. Had a pet up, using the same profile I use normally (so had assist and such checked).
Targetted a mob, casted wards etc then nuked down and killed the mobs.
If someone wants me to look at this further I'll need a lot more specific information.
Here's what I can give you...let me know what else I can look for.
ISXEQ2 v20130820.0005
ISXOgre Build Date 2013.08.18 Patch version 225
Ogre Combat Asst 16.001a**********
Defiler Manager Ui ver:6.22
Log into defiler with pet and no mercs, Load default defiler settings for this test. Clear all settings except for combat arts (even cleared all combat arts except for 1 to use) and checked ignore health 100%.
Target mob, Defiler will attack and slowly kill and send in pet.
Zone into DC solo. Target mob..nothing...manually get mob to 90%, Defiler stands there not attacking and pet doing same. Turn on auto attack, does nothing. Move to area / behind mob, nothing. Any setting that has to do with the mob does not do anything as though it doesn't have a target. Even though you manually targeted.
What does work..turning on priority and it has the ability to use heals at that point as long as the intended target is the defiler.
Zone out, target mob...works as intended.
Only errors in console is once you initiate combat and hit escape to clear your target (in combat it auto targets who is attacking you, this is the normal game function not the auto target when hated) then you will get a few lines of "There is no entity in this area with an id of 2147483647" until it has the mob who is attacking as the target again.
To produce that error in the console more often, group with a 2nd toon and have it designated as the tank. So you would want the defiler to heal, follow, assist etc.
Works as intended out of zone.
Tried grouping out of range so no buffs will be applied. Tank pulls defiler into DC solo. When both are spawned, buffs are applied to both, defiler now follows the tank (though at this point the defiler never has the tank as the target as is does out of the zone). Open console and this is being spammed about every 1-2 seconds. "There is no entity in this area with an id of 2147483647"
At this point you can disable auto assist and that message will stop spamming in the console.
Manually move tank and start killing mobs, defiler will follow and use the priority tab abilities only if they would apply to the defiler, but not attack anything or heal the tank.
This was on a Vista 64 setup. Tried the same on a Win7 64 and had same results. Both have same program version #'s.
Debugging tab: When used with single defiler in zone with pet only first option checked produced results only when the defiler was using the priority tab to heal itself. It would show the heal and the target as the defiler.
The only other option that would produce results as a spam is if Ogre echo what is it doing was checked...then it spams -main loop (start of routine) continously.
What else would you need? If you can't reproduce, I understand that you can't fix. Also seems that when running zone and manually casting abilities they are lagging a bit, though it's not that way out of the zone. Also it worked on a patch day where the servers were reset and it wasn't working the night before. But then after a day or two (I don't run them daily) it is back to this issue.
I don't know the exact day it started, but it's probably been around 2 - 3 weeks at the most.
